Strip Linear
COB Chip-on-FPC RGB LED Strip Light Series
How should COB Chip-on-FPC RGB LED Strip Light Series be specified for a commercial or architectural lighting project?
A flexible RGB COB-on-FPC series intended for continuous-looking color light and curved or narrow installations. The catalogue confirms COB construction principles for the family, but exact RGB chip density, voltage, power, cut length and controller data require an RGB COB datasheet.
- Power
- Confirm for selected configuration
- Input
- Confirm for selected configuration
- Efficacy
- Confirm for selected configuration
- CCT
- RGB color mixing
- CRI
- n/a for RGB
- Protection
- Confirm for selected configuration
Final specifications, certificates, control compatibility, MOQ and delivery terms are confirmed against the selected configuration and destination market.
Decision summary
What buyers should know
- Select the exact variant by voltage, LED/color architecture, density, PCB width, cut length, output, IP process and installation system.
- Control and smart-system support is project-dependent and must be confirmed against the selected driver/controller/gateway.
- Use the current exact-model datasheet, sample and certificate coverage—not a series-level marketing statement—as final project evidence.
Buyer fit
Where this product fits—and where it does not
Use these boundaries before comparing detailed models. Project drawings and the selected SKU remain the final specification basis.
Best for
- Commercial cove and linear accent lighting RGB COB strip can be selected as part of a strip, profile, driver and control system.
- Project-specific OEM/ODM requirements Length, PCB, color, IP process, connector and packaging options can be reviewed during RFQ.
- Dot-reduced decorative and architectural color lighting Dense COB construction can provide a more continuous light line than widely spaced SMD pixels when correctly diffused.
Confirm another option when
- Final specification without an approved exact-model datasheet Series-level information does not replace the confirmed SKU, test report or engineering drawing.
- Long runs without voltage-drop and thermal review Run length, cable, power supply, profile and operating temperature affect performance and reliability.
Technical selection
Specifications and available variants
Select the family or model first, then confirm drawings, photometric files, driver and market-specific compliance before order.
Electrical
- Input voltage
- Confirm for selected configuration
- Power range
- Confirm for selected configuration
- Driver / control
- Can be configured for project-dependent dimming or smart control after compatibility review. Confirm the selected driver/controller, voltage, load, channel count, wiring, gateway, commissioning responsibility and destination market. Customer-specified overseas systems may be reviewed; support is not standard on every variant. RGB requires a matching multi-channel controller; verify common-anode/cathode wiring and load.
Optical
- Efficacy
- Confirm for selected configuration
- Lumen output
- Confirm for selected configuration
- CRI options
- n/a for RGB
- CCT options
- RGB color mixing
- Beam angle
- needs_confirmation for RGB COB variant
Mechanical
- Dimensions
- flexible FPC; exact PCB width and cut interval need_confirmation
- Materials
- COB chips on flexible printed circuit
- IP rating
- Confirm for selected configuration
- Mounting
- Adhesive or aluminum profile
- Installation notes
- Confirm bend radius, profile/diffuser, heat dissipation, run length and waterproof termination.
Model and variant matrix
| Model / Variant | Power | Dimension | CCT | CRI | Efficacy | Lifespan |
|---|---|---|---|---|---|---|
| RGB COB-on-FPC series | Confirm for selected configuration | flexible FPC; exact PCB width and cut length need_confirmation | RGB | n/a | Confirm for selected configuration | Confirm for selected configuration |
Detailed specification reference
| Parameter | Value | Condition / Evidence |
|---|---|---|
| Construction | COB chips fixed on flexible PCB/FPC | family construction catalog PDF page 6 + migrated page |
| Color | RGB | controller required migrated page |
| Voltage and density | Confirm for selected configuration | exact RGB COB datasheet required claim ledger |
| Beam | COB white reference states 180°; RGB COB value needs_confirmation | do not transfer without proof catalog PDF page 6 |
Smart and project integration
Control compatibility
Control support is configuration-dependent. Driver, protocol, gateway, wiring, voltage and certification market must be reviewed together.
Can be configured for project-dependent dimming or smart control after compatibility review. Confirm the selected driver/controller, voltage, load, channel count, wiring, gateway, commissioning responsibility and destination market. Customer-specified overseas systems may be reviewed; support is not standard on every variant.
Evidence and documents
Compliance, catalogues and specification evidence
Certificate applicability and document revision must match the ordered configuration and destination market.
Evidence notes
- Listed catalogue variants and values were transcribed from the 2025 Besenled LED strip and neon catalogue. catalogue
- Migrated WooCommerce wording is treated as a claim ledger and not as final test evidence where it lacks an exact-model source. methodology
B2B procurement
Prepare a quote-ready request
Besenled confirms commercial terms after the product configuration, quantity, project schedule and target market are defined.
- MOQ
- Project-dependent; confirm by exact variant, quantity and customization scope.
- Sample policy
- Sample can be quoted after voltage, color/CCT, PCB, IP process, driver/controller and accessory requirements are confirmed.
- Sample lead time
- Confirm for selected configuration
- International lead time
- Confirm for selected configuration
- Warranty
- Project- and model-dependent; confirm in the quotation and approved datasheet.
- Quote basis
- Rfq Required
Information needed for RFQ
- 1 Voltage, color/CCT, CRI and target outputNeeded to select the strip family and exact variant.
- 2 LED density, PCB width, cut length and run lengthNeeded for dimensions, power calculation, voltage drop and accessory matching.
- 3 IP process, profile and installation environmentNeeded for heat dissipation, sealing and mounting selection.
- 4 Driver, controller and smart-system requirementNeeded to review dimming, channel, gateway, wiring and protocol compatibility.
- 5 Quantity, destination market, documents and target dateNeeded to confirm MOQ, sample, compliance scope, packaging and lead time.
Buyer questions
FAQ and source notes
- Last fact checked
- August 5, 2026
How should COB Chip-on-FPC RGB LED Strip Light Series be specified?
Start with application, voltage, color/CCT, LED density, output, PCB width, cut length, IP process, profile, driver/controller and destination-market requirements. Then confirm the exact model and sample.
Are all control protocols supported as standard?
No. DALI/DALI-2, 0-10V, Zigbee, Bluetooth Mesh, DMX512, phase-cut, Tuya, Casambi, KNX/BMS or a customer-specified ecosystem require a compatible driver/controller/gateway and project review.
What evidence should be approved before ordering?
Approve the exact-model datasheet, dimensions, electrical load, sample, applicable certificate coverage, control compatibility and packaging requirement.
Next procurement step
Request a configuration review and quotation
Send the application, model or required performance, quantity, voltage, controls, destination market and target schedule.