LED Strip Lights
Besenled High Voltage LED Strip Series
When should a buyer consider Besenled high-voltage LED strip?
High-voltage strip is considered when a project needs 110V-220VAC long-run strip systems, but final use requires confirmation of safety approvals, cutting rules, plug/rectifier/accessories and installation market requirements.
- Input
- 110V-220VAC
Final specifications, certificates, control compatibility, MOQ and delivery terms are confirmed against the selected configuration and destination market.
Decision summary
What buyers should know
- Use this page as the RFQ-ready family page; exact SKU choice depends on voltage, LED density, PCB width, color and installation condition.
- Catalog values are treated as source facts; peer references are not used as Besenled test evidence.
- Confirm final datasheet, certificate applicability and sample lead time before public final publication.
Buyer fit
Where this product fits—and where it does not
Use these boundaries before comparing detailed models. Project drawings and the selected SKU remain the final specification basis.
Best for
- Longer decorative runs High-voltage systems may reduce driver placement complexity.
- Projects requesting 110V/220V strip categories Catalogue shows HV strip series and accessories.
- RFQs needing accessory kits Tape/accessory page supports companion items.
Confirm another option when
- Low-voltage cabinet/profile lighting Use 12V/24V strip families.
- Projects without electrical compliance review High-voltage products require market-specific certification and installer review.
Technical selection
Specifications and available variants
Select the family or model first, then confirm drawings, photometric files, driver and market-specific compliance before order.
Electrical
- Input voltage
- 110V-220VAC
- Driver / control
- Use constant-voltage LED drivers or compatible controllers according to selected strip/controller type; final wiring and load must be confirmed per project.
Mechanical
- Installation notes
- Confirm heat dissipation, driver capacity, maximum run length and profile/diffuser selection before order.
Model and variant matrix
| Model / Variant | Power | Dimension | CCT | CRI | Efficacy | Lifespan |
|---|---|---|---|---|---|---|
| HV LED Strip SMD3528/2835 Series | Confirm for selected configuration | project-specific | white/color options needs_confirmation | Confirm for selected configuration | Confirm for selected configuration | 50,000h |
| HV LED Strip SMD5050/3014/5730 Series | Confirm for selected configuration | project-specific | white/color options needs_confirmation | Confirm for selected configuration | Confirm for selected configuration | 50,000h |
Detailed specification reference
| Parameter | Value | Condition / Evidence |
|---|---|---|
| Input voltage | 110V-220VAC | catalog page 42 |
| LED package options | SMD3528, 2835, 5050, 3014, 5730 | catalog page 42 |
| Accessories | 3M 9495 300LSE, 3M 9472 300LSE, 3M 9080, 3M 5604, 3M 5925, Blue Tape | catalog page 43 |
| Tape thickness | 0.13-0.64mm by tape model | catalog page 43 |
| Safety/certification | needs_confirmation by market | not fully specified in catalogue |
Smart and project integration
Control compatibility
Control support is configuration-dependent. Driver, protocol, gateway, wiring, voltage and certification market must be reviewed together.
Compatible controller/driver depends on voltage, color type and project control requirement.
Evidence and documents
Compliance, catalogues and specification evidence
Certificate applicability and document revision must match the ordered configuration and destination market.
Evidence notes
- Product family and listed variants are extracted from Besenled catalogue or quotation source. catalogue
- Peer reference is used only for market classification and missing generic assumptions, not as product proof. Peer Reference
B2B procurement
Prepare a quote-ready request
Besenled confirms commercial terms after the product configuration, quantity, project schedule and target market are defined.
Customization scope
- MOQ
- Project-dependent; confirm by selected model and customization scope.
- Sample policy
- Samples can be quoted after confirming voltage, color, PCB width, waterproof/IP process and accessories.
- Warranty
- Product-dependent; confirm on quotation and final datasheet.
- Quote basis
- Rfq Required
Information needed for RFQ
- 1 Voltage and color typeNeeded to select correct strip/controller/profile combination.
- 2 LED density, PCB width and length per runNeeded for power calculation, voltage drop and accessory matching.
- 3 IP/waterproof requirement and installation environmentNeeded to choose bare strip, coating, silicone tube, extrusion or profile.
- 4 Driver/controller/control methodNeeded to confirm dimming, RGB/RGBW/RGBCCT, 2.4G/RF/IR, DALI/DMX if required.
- 5 Quantity, packaging and certification marketNeeded for MOQ, lead time and compliance confirmation.
Buyer questions
FAQ and source notes
- Last fact checked
- July 29, 2026
Should this product be selected by exact SKU or by project requirement?
Select by project requirement first: voltage, color type, density, PCB width, IP/process, run length, profile and control method. Then confirm the exact SKU and datasheet.
Are peer-reference values final Besenled specifications?
No. Peer references are used only to classify common market options and fill generic missing context. Final specs need Besenled datasheet or sample confirmation.
What information is needed for an RFQ?
Voltage, color/CCT, length, quantity, IP rating, profile/accessory requirement, controller/dimming method, certification market and packaging requirement.
Next procurement step
Request a configuration review and quotation
Send the application, model or required performance, quantity, voltage, controls, destination market and target schedule.