LED Strip Lights
Besenled 335 Side View LED Strip Light Series
When should a Besenled 335 side-view LED strip be selected?
Besenled 335 side-view strip includes 60 and 120 LEDs/m options, 12V/24V, 8mm PCB, 2400K-7000K CCT and Ra80+ catalogue options.
- Protection
- Confirm for selected configuration
Final specifications, certificates, control compatibility, MOQ and delivery terms are confirmed against the selected configuration and destination market.
Decision summary
What buyers should know
- Use this page as an RFQ-ready product-family page; select exact SKU by voltage, LED density, PCB width, CCT/CRI, IP process and run length.
- Catalogue values are treated as Besenled source facts; peer references are not used as Besenled test evidence.
- Items marked needs_confirmation require final datasheet, certificate or sales confirmation before public final publication.
Buyer fit
Where this product fits—and where it does not
Use these boundaries before comparing detailed models. Project drawings and the selected SKU remain the final specification basis.
Best for
- Edge lighting and shallow channels Side-view LED package emits from the edge rather than the strip face.
- Signage and contour lighting The side-emitting layout helps route light around narrow outlines.
- Low-profile architectural details 8mm PCB and side emission fit tight locations.
Confirm another option when
- Standard face-emitting cove lighting Use standard 2835/3014/COB strips when front emission is required.
- High-output general illumination Typical flux is lower than high-output 5730 or dense 3014 options.
Technical selection
Specifications and available variants
Select the family or model first, then confirm drawings, photometric files, driver and market-specific compliance before order.
Mechanical
- Dimensions
- 8mm PCB; 1.8mm slim thickness noted
- Materials
- white flexible PCB
- IP rating
- Confirm for selected configuration
- Mounting
- edge channel, signage channel, adhesive or profile
- Installation notes
- Confirm side-emitting orientation in drawings before production.
Model and variant matrix
| Model / Variant | Power | Dimension | CCT | CRI | Efficacy | Lifespan |
|---|---|---|---|---|---|---|
| 335-60-12V/24V-8MM | 4.2W/m rated; 4.8W/m max | 8mm PCB | 2400K-7000K | Ra80+ | 240-300 lm/m typical flux | Confirm for selected configuration |
| 335-120-12V/24V-8MM | 8.64W/m rated; 9.6W/m max | 8mm PCB | 2400K-7000K | Ra80+ | 480-600 lm/m typical flux | Confirm for selected configuration |
Detailed specification reference
| Parameter | Value | Condition / Evidence |
|---|---|---|
| Input voltage | 12V/24V DC | catalog page 15 |
| LED density | 60 or 120 LEDs/m | catalog page 15 |
| PCB width | 8mm | catalog page 15 |
| CCT | 2400K-7000K | eight optional white light choices catalog page 15 |
| CRI | Ra80+ | catalog page 15 |
| Typical flux | 240-600 lm/m | by density and CCT catalog page 15 |
Smart and project integration
Control compatibility
Control support is configuration-dependent. Driver, protocol, gateway, wiring, voltage and certification market must be reviewed together.
Compatible driver/controller depends on voltage, color type and dimming/control requirement.
Evidence and documents
Compliance, catalogues and specification evidence
Certificate applicability and document revision must match the ordered configuration and destination market.
Evidence notes
- Product family and listed variants are extracted from Besenled catalogue source pages. catalogue
- Peer reference is used only for market taxonomy and missing generic assumptions, not as product proof. Peer Reference
B2B procurement
Prepare a quote-ready request
Besenled confirms commercial terms after the product configuration, quantity, project schedule and target market are defined.
Customization scope
- MOQ
- Project-dependent; confirm by selected model and customization scope.
- Sample policy
- Samples can be quoted after confirming voltage, color/CCT, PCB width, waterproof/IP process and accessories.
- Warranty
- Product-dependent; confirm on quotation and final datasheet.
- Quote basis
- Rfq Required
Information needed for RFQ
- 1 Voltage and color/CCT/CRI requirementNeeded to select the correct strip variant and compatible driver/controller.
- 2 LED density, PCB width and length per runNeeded for power calculation, voltage drop, aluminum profile matching and accessory selection.
- 3 Installation environment and IP requirementNeeded to choose bare strip, coating, silicone sleeve, neon flex or profile protection.
- 4 Quantity, packaging and destination marketNeeded for MOQ, lead time and certificate coverage check.
Buyer questions
FAQ and source notes
- Last fact checked
- July 29, 2026
Should this product be selected by exact SKU or by project requirement?
Select by project requirement first: voltage, color/CCT, density, PCB width, IP/process, run length, profile and control method. Then confirm the exact SKU and datasheet.
Are peer-reference values final Besenled specifications?
No. Peer references are used only to classify common market options and missing generic context. Final specs need Besenled datasheet or sample confirmation.
What information is needed for an RFQ?
Voltage, CCT/color type, length, quantity, IP rating, profile/accessory requirement, controller/dimming method, certificate market and packaging requirement.
Next procurement step
Request a configuration review and quotation
Send the application, model or required performance, quantity, voltage, controls, destination market and target schedule.