5050 Epistar CRI 90-95 High-Quality LED Strip Light

Strip Linear

5050 Epistar CRI 90-95 High-Quality LED Strip Light

How should 5050 Epistar CRI 90-95 High-Quality LED Strip Light be specified for a commercial or architectural lighting project?

A 5050 white LED strip positioned for high color quality. The migrated page states CRI 90-95, while the 2025 catalogue provides CRI 80+/90+ variants; CRI 95 and exact performance remain confirmation items for the selected SKU.

Power: listed variants approximately 6.5-20 W/m rated
Input: DC12V / DC24V
Efficacy: needs exact-model calculation/verification
CCT: 2200K-6500K in listed family
CRI: CRI 80+ / CRI 90+ listed; CRI 95 needs_confirmation
Protection: IP process is configurable; confirm exact construction

Final specifications, certificates, control compatibility, MOQ and delivery terms are confirmed against the selected configuration and destination market.

Decision summary

What buyers should know

Select the exact variant by voltage, LED/color architecture, density, PCB width, cut length, output, IP process and installation system.
Control and smart-system support is project-dependent and must be confirmed against the selected driver/controller/gateway.
Use the current exact-model datasheet, sample and certificate coverage—not a series-level marketing statement—as final project evidence.

Buyer fit

Where this product fits—and where it does not

Use these boundaries before comparing detailed models. Project drawings and the selected SKU remain the final specification basis.

Best for

Commercial cove and linear accent lighting 5050 high-CRI strip can be selected as part of a strip, profile, driver and control system.
Project-specific OEM/ODM requirements Length, PCB, color, IP process, connector and packaging options can be reviewed during RFQ.
Retail, display, hospitality and color-sensitive interiors High-CRI variants are intended for projects where color appearance matters.

Confirm another option when

Final specification without an approved exact-model datasheet Series-level information does not replace the confirmed SKU, test report or engineering drawing.
Long runs without voltage-drop and thermal review Run length, cable, power supply, profile and operating temperature affect performance and reliability.

Technical selection

Specifications and available variants

Select the family or model first, then confirm drawings, photometric files, driver and market-specific compliance before order.

Electrical

Input voltage: DC12V / DC24V
Power range: listed variants approximately 6.5-20 W/m rated
Driver / control: Can be configured for project-dependent dimming or smart control after compatibility review. Confirm the selected driver/controller, voltage, load, channel count, wiring, gateway, commissioning responsibility and destination market. Customer-specified overseas systems may be reviewed; support is not standard on every variant.

Optical

Efficacy: needs exact-model calculation/verification
Lumen output: catalog examples approximately 520-2180 lm/m depending on variant and CCT
CRI options: CRI 80+ / CRI 90+ listed; CRI 95 needs_confirmation
CCT options: 2200K-6500K in listed family
Beam angle: Confirm for selected configuration

Mechanical

Dimensions: 10-18 mm PCB depending on density and row
Materials: Flexible PCB with SMD 5050 LEDs
IP rating: IP process is configurable; confirm exact construction
Mounting: Adhesive or aluminum profile
Installation notes: Confirm profile/diffuser, thermal path, run length, power feed and IP termination.

Model and variant matrix

Model / Variant	Power	Dimension	CCT	CRI	Efficacy	Lifespan
5050-60-12V/24V-10MM	14.4 W/m max; 13 W/m rated	10 mm PCB; 60 LEDs/m	2200K-6500K	CRI 80+ / CRI 90+ listed; CRI 95 needs_confirmation	1250 lm/m at 2700K Ra80 or 1350 lm/m at 6000K Ra80	Confirm for selected configuration
5050-96-24V-12.5MM	23 W/m max; 20 W/m rated	12.5 mm PCB; 96 LEDs/m	2200K-6500K	CRI 80+ / CRI 90+ listed	1920 lm/m at 2700K Ra80 or 2180 lm/m at 6000K Ra80	Confirm for selected configuration

Detailed specification reference

Parameter	Value	Condition / Evidence
LED package	SMD 5050	white-light family catalog PDF pages 8-9
Voltage	DC12V / DC24V	variant-dependent catalog PDF pages 8-9
CRI	CRI 80+ and CRI 90+ listed; CRI 90-95 marketing claim requires exact-model proof	confirm exact SKU catalog PDF pages 8-9 + migrated page
PCB width	10 mm to 18 mm in listed 5050 variants	density/row-dependent catalog PDF pages 8-9

Smart and project integration

Control compatibility

Control support is configuration-dependent. Driver, protocol, gateway, wiring, voltage and certification market must be reviewed together.

Triac Phase Cut 0 10v dali dmx512 zigbee Bluetooth Mesh

Can be configured for project-dependent dimming or smart control after compatibility review. Confirm the selected driver/controller, voltage, load, channel count, wiring, gateway, commissioning responsibility and destination market. Customer-specified overseas systems may be reviewed; support is not standard on every variant.

Evidence and documents

Compliance, catalogues and specification evidence

Certificate applicability and document revision must match the ordered configuration and destination market.

Evidence notes

Listed catalogue variants and values were transcribed from the 2025 Besenled LED strip and neon catalogue. catalogue
Migrated WooCommerce wording is treated as a claim ledger and not as final test evidence where it lacks an exact-model source. methodology

B2B procurement

Prepare a quote-ready request

Besenled confirms commercial terms after the product configuration, quantity, project schedule and target market are defined.

MOQ: Project-dependent; confirm by exact variant, quantity and customization scope.
Sample policy: Sample can be quoted after voltage, color/CCT, PCB, IP process, driver/controller and accessory requirements are confirmed.
Sample lead time: Confirm for selected configuration
International lead time: Confirm for selected configuration
Warranty: Project- and model-dependent; confirm in the quotation and approved datasheet.
Quote basis: Rfq Required

Information needed for RFQ

1 Voltage, color/CCT, CRI and target outputNeeded to select the strip family and exact variant.
2 LED density, PCB width, cut length and run lengthNeeded for dimensions, power calculation, voltage drop and accessory matching.
3 IP process, profile and installation environmentNeeded for heat dissipation, sealing and mounting selection.
4 Driver, controller and smart-system requirementNeeded to review dimming, channel, gateway, wiring and protocol compatibility.
5 Quantity, destination market, documents and target dateNeeded to confirm MOQ, sample, compliance scope, packaging and lead time.

Application path

FAQ and source notes

Last fact checked: August 5, 2026

How should 5050 Epistar CRI 90-95 High-Quality LED Strip Light be specified?

Start with application, voltage, color/CCT, LED density, output, PCB width, cut length, IP process, profile, driver/controller and destination-market requirements. Then confirm the exact model and sample.

Are all control protocols supported as standard?

No. DALI/DALI-2, 0-10V, Zigbee, Bluetooth Mesh, DMX512, phase-cut, Tuya, Casambi, KNX/BMS or a customer-specified ecosystem require a compatible driver/controller/gateway and project review.

What evidence should be approved before ordering?

Approve the exact-model datasheet, dimensions, electrical load, sample, applicable certificate coverage, control compatibility and packaging requirement.

Sources and methodology Primary structured source: /Users/raincai/Downloads/2-好软件/GEO网站工具/besenledlight/catalog-extract/2025-besen-led-strip-neon-catalog/pages-text.json; catalog PDF pages 8-9 (printed pages 05-08); migrated Woo content. Existing migrated product content was retained as a claim source but is not treated as laboratory proof. Exact-model performance, certificates and commercial terms remain subject to verification.